Connect to PC and install KO Driver. After the driver is installed, communication is possible with the created virtual COM port. (Refer to the KO Driver installation manual for the KO Driver installation method.) Connect with a jumper 13/80 Kondo Kagaku Co., Ltd.

2016.4.1< ICS >, ICS devices, ICS USB AdaptorHS, Personal Computer

Hello

  1. The COM number of the USB device. The content of the CD Rom: In the CD Rom, inside the USB folder you will find below folders. We will use KO driver to the USB Serial Port. When you first connect the USB devise to the computer, a wizard window will pop-up because the computer has found a new hardware. We are going to install 2 drivers.
  2. Please contact Kondo Kagaku if you discover any typographical errors in this document. Please note however that we may be unable to respond to questions regarding the content or programming. The content of this manual and the various names herein may be changed without advance notice. Kondo Kagaku Co., Ltd. 1.2.0.2 B3M Series Software.
  3. Kondo B3M motor driver This ROS package contains hardware interface to Kondo Kagaku's ICS motor system. ICS (Interactive Communication System) is a kind of serial bus to control RC servo motors. Basically it can control measure its position.

In order to answer the question 'Can I use ICS Adapter HS for Windows 10?', I upgraded my PC from Windows 7 to Windows 10 this time.There are some difficult points in handling the computer, but it is safe to do it according to the procedure. I will report in detail how to install! Sorry for some capture screen is by Japanese.

This is an adapter for connecting a personal computer with KO PROPO's ICS compatible equipment (propo, servo, ESC, etc.) and used by connecting it to the USB 2.0 port of the personal computer.

By putting the dedicated application of the ICS compatible device into the PC, you can change the setting, save the setting information on the PC, update the EX-2 expansion software, and use it for various purposes.
In order to use the ICS USB Adapter HS, first install the software 'KO Driver2015' to make the PC recognize the adapter.

KO Driver 2015 is software that can be downloaded for free from the technical guide on the KOPROPO website.

KO Driver 2015 is the latest version and supports after windows7.

The communication method has been improved even if it is used on Windows 7 or earlier.
If you are using a KO Driver 2013 or earlier driver, updating to KO Driver 2015 may be shorten the communication time!

From the conclusion, if you upgraded ≪If your previous PC environment is properly synchronized≫, then you will use it. The COM number of the previous setting is also exchanged.

If the environment is properly synchronized: In my environment, I can not synchronize immediately, and there is a climate that has been helped by Microsoft support personnel before the previous environment is restored. ... Let's receive the topic here that the installation of ICS USB adapter HS on a new PC has been reproduced!

The following operation is an example of my personal computer environment. Depending on your environment, please be aware that the operation may not be the same. If you have any questions, please contact our service department.

【1】Down load KO driver 2015 form our site.

If your windows 10 is initial setting situation, it will be download to PC>download folder.

Downloaded file is compressed files by ZIP.
'KO_Driver _2015' folder is appear after uncompressed fiels.
Usually, extract menu is appear when right button click by mouse to file.
But, it will be changed by windows version. If you can not find uncompressed menu, you must use other software for uncompress.

【2】Insert ICS USB ICS Adapter HS to USB port in the PC.

This is display in the screen asl like right photo when insert ICS USB Adapter to PC.
'ICS USB Adapter is ready to use ' is appear in the window when bar in the screen is finished.

【3】Confirm by Device manager software.

Select start button in the left bottom at windows screen and open start menu.


Open setting menu, please click to 'Settings' for Gear mark icon.

Click 'Device'

Scanner and printer pages is appear, please click 'device manager ' in the most bottom this page.

In 'Device manager' , can confirm device situation in this PC.
In my PC, ICS USB adapter is appear but with ! mark is added. It means detected by 'Other device'.
In this situation, can not use this. I will try update driver.

【4】Driver update

Please right click on the ICS USB adapter HS and select 'driver update'

Wndow are displyed and ask 'How to seach the driver software?'.
Please select 'Browse my computer for driver software'

Refer to driver software in the PC. Pleae click 'refer' button and select KO_driver2015 Folder.(This folder is downloaded and uncompressed files.)
Also, please check the 'seach sub folders'

If you click 'next' button, driver install will be start.

Install is start. And may be appear 'trust this software?'. in this case, please click Yes or Trust.

Install is cmplete.

Please confirm by device manager again.
ICS USB Adapter HS is displayed in 'Universal serial bus controller'.
And 'USB Serial port ' are displayed together with ! mark.
This is part of ICS USB adapter, so pleae update this driver.
Also, operate same procidure as last time.

Install is complete. Please confirm by device manager.

If ICS USB Adapter HS(COM number) is displayed in the Port(Com &LPT), driver install is finished.

Nmber is changed by each environment.
it will be need for using software, please record for using later.

Thank you for reading.

Related product

RSx2-Response H.C

End of production
No. 30106

RSx2-Response

End of production
No. 30108

BSx2-Response HC

End of production
No. 30201

BSx2-Response

End of production
No. 30203

RSx-one10

End of production
No. 30104

BSx2-one10 Response

End of production
No. 30205

BSx2-one10 Grasper

End of production
No. 30207

RSx-12 World spec version

End of production
No. 30115

RSx-12 JPN National Champion spec 2015

End of production

Drivers Kondo Kagaku Usb Devices Pc Camera

No. 30117Drivers kondo kagaku usb devices adapter

PDS-2502 ICS

End of production
No. 30050

PDS-2512 ICS

End of production
No. 30052

VFS-FR2 ESC for Brushed Mortor with reverse

No. 40448

2016.4.1< ICS >, ICS devices, ICS USB AdaptorHS, Personal Computer

Hello

In order to answer the question 'Can I use ICS Adapter HS for Windows 10?', I upgraded my PC from Windows 7 to Windows 10 this time.There are some difficult points in handling the computer, but it is safe to do it according to the procedure. I will report in detail how to install! Sorry for some capture screen is by Japanese.

This is an adapter for connecting a personal computer with KO PROPO's ICS compatible equipment (propo, servo, ESC, etc.) and used by connecting it to the USB 2.0 port of the personal computer.

By putting the dedicated application of the ICS compatible device into the PC, you can change the setting, save the setting information on the PC, update the EX-2 expansion software, and use it for various purposes.
In order to use the ICS USB Adapter HS, first install the software 'KO Driver2015' to make the PC recognize the adapter.

KO Driver 2015 is software that can be downloaded for free from the technical guide on the KOPROPO website.

KO Driver 2015 is the latest version and supports after windows7.

The communication method has been improved even if it is used on Windows 7 or earlier.
If you are using a KO Driver 2013 or earlier driver, updating to KO Driver 2015 may be shorten the communication time!

From the conclusion, if you upgraded ≪If your previous PC environment is properly synchronized≫, then you will use it. The COM number of the previous setting is also exchanged.

If the environment is properly synchronized: In my environment, I can not synchronize immediately, and there is a climate that has been helped by Microsoft support personnel before the previous environment is restored. ... Let's receive the topic here that the installation of ICS USB adapter HS on a new PC has been reproduced!

The following operation is an example of my personal computer environment. Depending on your environment, please be aware that the operation may not be the same. If you have any questions, please contact our service department.

【1】Down load KO driver 2015 form our site.

If your windows 10 is initial setting situation, it will be download to PC>download folder.

Downloaded file is compressed files by ZIP.
'KO_Driver _2015' folder is appear after uncompressed fiels.
Usually, extract menu is appear when right button click by mouse to file.
But, it will be changed by windows version. If you can not find uncompressed menu, you must use other software for uncompress.

【2】Insert ICS USB ICS Adapter HS to USB port in the PC.

This is display in the screen asl like right photo when insert ICS USB Adapter to PC.
'ICS USB Adapter is ready to use ' is appear in the window when bar in the screen is finished.

【3】Confirm by Device manager software.

Select start button in the left bottom at windows screen and open start menu.


Open setting menu, please click to 'Settings' for Gear mark icon.

Click 'Device'

Drivers Kondo Kagaku Usb Devices Pc Camera

Scanner and printer pages is appear, please click 'device manager ' in the most bottom this page.

In 'Device manager' , can confirm device situation in this PC.
In my PC, ICS USB adapter is appear but with ! mark is added. It means detected by 'Other device'.
In this situation, can not use this. I will try update driver.

【4】Driver update

Please right click on the ICS USB adapter HS and select 'driver update'

Wndow are displyed and ask 'How to seach the driver software?'.
Please select 'Browse my computer for driver software'

Refer to driver software in the PC. Pleae click 'refer' button and select KO_driver2015 Folder.(This folder is downloaded and uncompressed files.)
Also, please check the 'seach sub folders'

If you click 'next' button, driver install will be start.

Install is start. And may be appear 'trust this software?'. in this case, please click Yes or Trust.

Install is cmplete.

Please confirm by device manager again.
ICS USB Adapter HS is displayed in 'Universal serial bus controller'.
And 'USB Serial port ' are displayed together with ! mark.
This is part of ICS USB adapter, so pleae update this driver.
Also, operate same procidure as last time.

Install is complete. Please confirm by device manager.

If ICS USB Adapter HS(COM number) is displayed in the Port(Com &LPT), driver install is finished.

Nmber is changed by each environment.
it will be need for using software, please record for using later.

Thank you for reading.

Related product

RSx2-Response H.C

End of production
No. 30106

RSx2-Response

End of production
No. 30108

BSx2-Response HC

End of production
No. 30201

Drivers Kondo Kagaku USB Devices


BSx2-Response

End of production
No. 30203

RSx-one10

End of production
No. 30104

BSx2-one10 Response

End of production
No. 30205

BSx2-one10 Grasper

End of production
No. 30207

RSx-12 World spec version

End of production
No. 30115

RSx-12 JPN National Champion spec 2015

End of production
No. 30117

PDS-2502 ICS

End of production
No. 30050

PDS-2512 ICS

End of production
No. 30052

VFS-FR2 ESC for Brushed Mortor with reverse

No. 40448